Olympus Fluoview FV1000 - Building an Image from a Different Viewpoint; Building Extended Focus Image from XYZ Image; Display Switching to Built Image

APPLIED OPERATIONS/Building an Image from a Different Viewpoint
OPERATION INSTRUCTIONS
2-295
Page
2-8 Building an Image from a Different Viewpoint
2-8-1 Building Extended Focus Image from XYZ Image
2-8-1-1 Display Switching to Built Image
An extended focus image can be built from XYZ (multiple sections) images and the display
can be switched to show the built image.
1. Display the image window of the XYZ (multiple sections) image.
2. The following button is displayed at the top of the image window.
(Usually, only the <XYZ series> button is displayed. When it is clicked, a list of buttons
appears as shown below.)
3. Click the <Extend> button.
4. Click the <Display> button at the top of the image window repeatedly to build the
extended-focus image.
(The extended-focus image can also be displayed by clicking and holding the <display>
button for successive display.)
<Display>button
<Extend> button
Displays the extend image.
<XYZ series> button
Displays only one of multiple sections image slices.