Olympus Fluoview FV1000 - Colocalization for Series Image Data Set

APPLIED OPERATIONS/Image Processing
OPERATION INSTRUCTIONS
2-254
Page
2-6-4-2 Colocalization for series image data set
Colocalization is also available for series image data set, i.e XYZ image data set.
Fig. 2-100 [Colocalization Processor] Dialog Box
Colocalization for series image data set
[Data Selection] Group Box
<Current slice> Option Button
The cocalization is processed fo
r
the image in a series data set which
is displayed in image window.
<Selected range> Option Button
This button appears when series
data set is in use.
The colocalization is processed on
to the all image of the data set.
<Draw> Button
<Draw> button appears
when image data set in use.
When <Current Slice>
option button is selected at
[Data Selection] group box,
and <Draw> buttons at right
side of text boxes – [LUT
Max] and [LUT Min] are
depressed, the values in
text boxes will not change
even if Current Slice image
displayed on image window
is changed. In case that
<Draw> buttons are popped
out, the values will change
with the Current Slice
change.