Olympus Fluoview FV1000 - Saving the Acquired Image in File

APPLIED OPERATIONS/Image Acquisition
OPERATION INSTRUCTIONS
2-33
Page
2-2-1-7 Saving the Acquired Image in File
1. Display the [File I/O] panel.
2. Click the page tab of the [Live] panel showing the image to be saved, so that the image
is displayed at the front.
3. Click the <Experiment> button in the [Save] group box in the [File I/O] panel.
For details, see section 2-3-1, “Saving Image”.
<Experiment> button