APPLIED OPERATIONS/Changing the Image Display Method
OPERATION INSTRUCTIONS
2-206
Page
2-5-4-2 Displaying Merged Image of Multiple Channels (Single View)
1. Display the image window of the merged image of multiple channels at the front.
2. Click the <Display switching> button at the top of the image window. The list of buttons
as shown below appears.
3. From the displayed list of buttons, press the <Single View> button. The image window
will show the images of multiple channels side by side. At the same time, the icon
shown in the <Display switching> button will change to the icon of the <Single View>
button.
4. Click the image to display the <Display channel switch> buttons at the bottom left of the
image.
5. Select the channels which should be displayed by pushing <Display channel switch>
buttons. The color of a selected channel’s button becomes darker.
Fig. 2-69 Panel Displayed Merged Image of Two Channels
<Display switching> button
<Single View>button
<Display channel switch>
buttons
<Channel 1> button
<Channel 2> button
<Channel 3> button
<Channel 4> button
<Channel 5> button
To Next Page
Loading...
