Olympus Fluoview FV1000 - Appending Image (Append); Appending Two Images

APPLIED OPERATIONS/Image Processing
OPERATION INSTRUCTIONS
2-258
Page
2-6-5 Appending image (Append)
2-6-5-1 Appending two images
Two images (A and B) acquired in XY or XYZ observation can be appended along the Z- or
T-direction or as animation.
A
B
A
B
XY image
XY image
XYT image
TIME
XYZT image
XYZ image
(XYT)
XYZ image
(XYT)
TIME
A
ppending in
T-direction
A
ppending in
T-direction (
Z)
The image files used in appending are subjected to the following
restrictions.
· The sizes of the two image files should be identical.
· The numbers of channels of the two image files should be identical.
· The T- or Z-observation conditions (interval times, acquisition times,
number of acquisitions, number of steps, etc.) of the two image files
should be identical.
· The combination of the two image files should be a combination with
which appending is permitted (see the table on page 2-273).
Two XY images can be appended in the T-direction with the following procedure.
1. Open the two image files (A and B) for appending.
2. Display the image window of the first image (A) at the front.
NOTE