Olympus Fluoview FV1000 - Appendix C USER REGISTRATION of FV1000; Appendix C-1 User Registration

Appendix C USER REGISTRATION OF FV1000
OPERATION INSTRUCTIONS
C-1
Page
Appendix C USER REGISTRATION OF
FV1000
FLUOVIEW FV1000 can store the system setup information (PMT Voltage, Gain, Offset, etc.) on a per-user basis.
To make this possible, you have to register yourself as a user and log in personally when starting up the FV1000
software.
Appendix C-1 User Registration
Register yourself as a new user.
1. Double-click the [FLUOVIEW Setup] icon on the desktop.
The dialog box for entering the user name appears as shown below.
2. Enter “Administrator” in the [User Name:] text box and click the <OK> button.
The [FLUOVIEW Setup] dialog box appears as shown below.
[FLUOVIEW Setup] icon