Olympus Fluoview FV1000 - Display the Change of Image Intensity (Point Scan)

APPLIED OPERATIONS/Image Acquisition
OPERATION INSTRUCTIONS
2-89
Page
2-2-10 Display the change of image intensity (Point Scan)
The change of fluorescence intensity according to time-lapse can be displayed graphically
by irradiating the laser to certain point on the image.
If you have FLUOVIEW TIME COURSE software, image acquisition can be started with
buttons, keys or input of external trigger signals.
1. Acquire an image in the XY observation mode. For the operation procedure, see section
2-2-1, “Image Acquisition with XY observation”.
2. Select <Point> under the [Point] option button in the [Mode] group box in the [Acquire]
panel.
Shows the X, Y
coordinates on the
image.