APPLIED OPERATIONS/Saving, Opening and Shredding Images
OPERATION INSTRUCTIONS
2-118
Page
2-3-1-2 Saving a Display
The displayed images can be hardcopied and saved in a disk. This method is used when it is
required to use a FLUOVIEW image in another application.
1. Display the image window showing the image to be saved at the front.
2. When there is more than one image to be saved, display the image to be saved using
the <Display> buttons.
3. Click the <Display> button in the [Save] group box. The [Save Experiment As] dialog
box as shown below appears.
Fig. 2-30 [Save Experiment As] Dialog Box
4. When it is required to change the save destination drive or directory, use the [Save in:]
drop-down list.
<Display> button
To Next Page
Loading...
