APPLIED OPERATIONS/Image Acquisition
OPERATION INSTRUCTIONS
2-15
Page
2-2-1-2 Setting the Filters
The excitation filter, spectral filter and barrier filters are set automatically to the light path
according to the dyeing method selected for the specimen.
To change filters, use the following procedure.
1. From the panel page tabs shown on the bottom right of the [Acquire] panel, select the
[Settings] sub-panel.
Fig. 2-6 [Settings] Sub-panel
<Scan Unit> button
Click to display the filter and
laser types to be set.
(Combination with the lase
combiner sets up the lase
automatically.)
To Next Page
Loading...
