APPLIED OPERATIONS/Protocol processor
OPERATION INSTRUCTIONS
2-169
Page
2-4-2-5 Protocol procedure supporting function
[Protocol Creator] window helps to make procedure, especially time-series, easily..
When [Protocol Creator] that exists in [Tool] menu bar of [PAPP] window is selected,
[Protocol Create] window appears. [Protocol Create] window is displayed at the position
and in width when the window was previously closed.
• Left side of [Protocol Creator] window has [Frame] tab, [Command] tab and [Loop]
tab.
Track can be made by drag and drop those icon(s) into [Track Image].
[Track] window appears and setting value can be entered.
• [Track] window does not appear with every drag and drop if [Show detail (when the
drop)] in [Option] menu of [Protocol Creator] is not checked.
• A pair of [For] and [Next] icon is added after drag and dropped [Loop] icon in [Loop]
panel into [Track Image]. [For] and [Next] icon can move to the Track by dragging the
appropriate position.
• [Track] window opens by double-clicking icon on [Track Image] group for detail
setting.
• Details of parameters are displayed in setting value display text box by clicking icon.
• Interval time of each Track can be entered into the text box.
• The parameters affect to the [PAPP] window by pressing
<Close> button.
Track No.
Drag & Drop
Setting value display text box
Interval time for each track
End time of each track
To Next Page
Loading...
