APPLIED OPERATIONS/Viewing 3D Image
OPERATION INSTRUCTIONS
2-314
Page
2-9-4 Building a 3D Image to be Viewed Through Color (Red/Green) Eyeglasses
Images composed of multiple image slices acquired by varying the multiple sections (XYZ
observation) can be built into an image which looks 3D when viewed through a pair of color
(red/green) eyeglasses. This image can be viewed three-dimensionally by watching them
with two eyes for a while.
The operation is similar with animation.. Perform steps 1 to 10 in section 2-9-2, “Animation”,
then proceed to the following steps. (Except that, in the [Method] group box, it is required to
click the [Brightest] option button.)
1. Check the [Stereo Pair] check box.
2. Click the <Begin Visualize> button to start building the images. When the building
completes, the built image is displayed in the [3D Animation] panel.
The status bar shows the progress of building processing.
During the building, the <Begin Visualize> button turns into the <Cancel
Visualize> button. Click the <Cancel Visualize> button if you want to cancel the
building.
3. The following buttons are displayed at the top of the image window.
4. Watch the image through a pair of color (red/green) eyeglasses.
The color (red/green) eyeglasses can also be used to view the animation. To
start animation, click the <Successive display> button.
TIP
TIP
3D image for color (red/green) eyeglasses.
TIP
To Next Page
Loading...
