APPLIED OPERATIONS/Entering Comment in Image
OPERATION INSTRUCTIONS
2-327
Page
2-12-3 Displaying the X-coordinate/Y-coordinate of the Image
The X-coordinate position or the Y-coordinate position of any pixel of an image can be
displayed.
1. Display the image window of the image that you want to display the X-coordinate position
or the Y-coordinate position at the front.
2. In the list of buttons displayed, click the <Text> button. The dialog box as shown below
appears.
Fig 2-141 [Active Overlays] Dialog Box
3. In the drop-down list inside the dialog box, select “x = <x hotspot value “” units> “ to
display the X-coordinate position or “Y = hotspot value “” units>“ to display the Y-
coordinate position.
4. On the image, place the mouse pointer on the position that you want to display the X-
coordinate position or the Y-coordinate position and click the mouse.
The displayed value indicates the distance from the origin when assuming the
upper left of the image as the origin.
<Text> button
TIP
To Next Page
Loading...
