Olympus Fluoview FV1000 - Associating a Detection Channel and Filter to the Dyeing Method

Software Setup/Adding the filters
MAINTENANCE
1-29
Page
1-5-4 Associating a Detection Channel and Filter to the Dyeing Method
The detection channel and filter can be associated to a dyeing method using the [Optical
System Configuration Setup] dialog box.
1. Display [FLUOVIEW Setup] dialog. See section 1-3-1 of this manual to display
[FLUOVIEW Setup] dialog.
2. Click [Fluorescence] icon located at [User Settings] in [FLUOVIEW Setup] dialog and
bring [Fluorescent Dyes/Colors] panel in front.
[Edit Dye Assign
Database] button.