Olympus Fluoview FV1000 - Switching the Displayed Channels (Ch1 - Ch5)

APPLIED OPERATIONS/Changing the Image Display Method
OPERATION INSTRUCTIONS
2-203
Page
6. If it is required to save the LUT in a file, click the <Save LUT> button in the [Color LUT
Tool] group box.
To load a previously saved LUT, click the <Load LUT> button.
2-5-3 Switching the Displayed Channels (Ch1 – Ch5)
The buttons on the bottom left of the screen can be used to select where the image of a
single channel or images of multiple channels are to be displayed. For the simultaneous
display of multi-channel images, see section 2-5-4, “Displaying Images of Multiple Channels
Simultaneously”.
TIP