APPLIED OPERATIONS/Image Analysis
OPERATION INSTRUCTIONS
2-286
Page
2-7-3 Image Measurement
2-7-3-1 Length Measurement
The length between two points in an image or the perimeter of a region in an image can be
measured.
The [Measurement Results] box in the [Single] sub-panel shows the measurement results
such as the length between 2 points (Length) or perimeter of the region (Perimeter) and the
horizontal and vertical lengths (X/Y, Z or T) of the region, and the statistic result of each
channel such as the total (Total), average (Average) and standard deviation (Std Dev).
The operation method for measuring the length between 2 points is identical to that for
displaying the intensity profile of a line. See section 2-7-1-1, “Intensity Values on a Line (Line
Profile)”. The operation method for measuring the perimeter of a region is identical to that for
displaying the bird’s eye view of a region. See section 2-7-1-2, “Intensity Values on a Planar
Region (Bird’s Eye View)”.
The measurement results can be written in comment by copying and pasting
them in the [Image Comments] dialog box in the [Experiments in Memory]
dialog box.
See section 2-3-4, “Saving Comment Together with Image” for details.
2-7-3-2 Area Measurement
The area of a region in the image can be measured.
The [Measurement Results] box in the [Single] sub-panel shows the measurement results
such as the area of the region (Area), perimeter of the region (Perimeter) and the horizontal
and vertical lengths ( X/Y, Z or T) of the region, and the statistic result of each channel such
as the total (Total), average (Average) and standard deviation (Std Dev).
The operation method is identical to that for displaying the bird’s eye view of a region. See
section 2-7-1-2, “Intensity Values on a Planar Region (Bird’s Eye View)”.
TIP
To Next Page
Loading...
