Olympus Fluoview FV1000 - Page 201

APPLIED OPERATIONS/Saving, Opening and Shredding Images
OPERATION INSTRUCTIONS
2-117
Page
5. When it is required to change the save destination drive or directory, use the [Save in:]
drop-down list.
6. When it is required to change the saved file type, use the [Save as Type:] drop-down
list. See section 2-3-1-5, “File Types Available for Save” for details.
7. Enter the file name in the [File Name:] text box.
[Auto Numbering] is enabled image file name appears in [File Name] text box.
Then, the image file can store with the numbering just pressing <Save> button.
One Point!
[Auto Numbering] check box moved to [Save Options] dialog box. For details, see section 1-
2-2-8, “File I/O Panel” in [FV300/500/1000 Newly Added Functions].
8. Click the <Save> button.
If a file with the same name as the entered file name already exists, a
dialog box is displayed to ask if you want to overwrite the existing file. If
you do not want to overwrite it, click the <NO> button and enter another
file name.
One Point!
Live image file is stored to the assigned folder with consecutive numbered file name when
[Seq. Number] is selected and [Auto Numbering] is enabled.
([Auto Numbering] check box moved to [Save Options] dialog box. For details, see section
1-2-2-8, “File I/O Panel” in [FV300/500/1000 Newly Added Functions].)
[Seq. Number] function is enabled when [Save Experiment As] dialog box
appears for not stored Live image is existing.
Seq. Numbering function is disabled once after the [Save Experiment As]
setting is changed.
NOTE
TIP
NOTE