APPLIED OPERATIONS/Changing the Image Display Method
OPERATION INSTRUCTIONS
2-221
Page
2. Click the <Experiment List> button in the toolbar. The [Experiments in Memory] dialog
box appears as shown below.
Fig. 2-80 [Experiments in Memory] Dialog Box
3. From the [Experiments in Memory] dialog box, select the file name of the second image
to be displayed and drag it into the frame at the top right of the [Tile] panel. The icon of
the second image is displayed in the frame at the top left of the [Tile] panel and the
acquisition parameters used in the image acquisition are displayed in the [Experiment]
panel.
The mouse pointer turns into the image icon during dragging.
4. Click the <Done> button in the [Experiments in Memory] dialog box to close it.
5. Set the number of images to be displayed together by using the <
> and < >
buttons in the [Columns] and [Rows] text boxes. How the images will be arranged can
be confirmed in the gray box at the upper part of the [Tiling] group box.
6. When there are multiple images to be displayed, select the following items in the [Tile
Over] drop-down list.
• Self: The same images as the image being displayed will be displayed.
• Z: Images are displayed according to change in multiple sections.
• T: Images are displayed according to change in time.
<Experiment List> button
TIP
To Next Page
Loading...
