Technical Data
16 - 29
ePC Interfaces
PC and Network Interfaces (CPC 100 V0 only)
CPC 100 V0 supports the 10BaseT (twisted pair) Ethernet (⇒ Glossary)
interface for connecting CPC 100 to a PC, a notebook or a network hub.
CPC 100 V0 is equipped with two RJ-45 connectors. The connector labeled
"PC" connects CPC 100 to a PC or a notebook, and the connector labeled
"Network" connects CPC 100 to a network hub. These two connectors differ only
in one cross-connection in the "PC" connector.
Network Interface (CPC 100 V1 only)
The network connection of CPC 100 V1 is implemented by the 10/100BaseTX
(twisted pair) Ethernet interface. CPC 100 V1 is equipped with one RJ-45
connector labeled "Network" for connecting CPC 100 to a PC, a notebook or a
network hub.
USB Interface (CPC 100 V1 only)
The CPC 100 V1 supports the USB interface for connecting the USB memory
stick shipped with the CPC 100. The USB interface is compliant with the
Universal Serial Bus (USB) Specification, Revision 1.1 and 2.0.
Note: The full functionality is guaranteed only for the USB memory stick
delivered with the CPC 100.
Note: Connect only one RJ-45 connector at a time.