Accessories
17 - 11
Changing the Batteries in CPOL
1. Open the cover of CPOL’s battery compartment using a screwdriver. Make
sure to position the screwdriver in an angled position as shown in the picture
below and push it downwards to lift the cap of the battery compartment.
2. Remove the old batteries and dispose of properly.
3. Insert the two lower batteries first (next to the cover’s "—" symbol), and push
them all the way in. Make sure you insert them with the "plus pole" going in
first, the "minus" pole pointing towards the compartment’s open cover.
To Next Page
Loading...
