235 HD-1500 Platform User's Manual 31500-000 Rev A
8.6 Maintaining and Replacing Batteries
Figure 8-20. Battery Case Roller Wheels
Installation
Make sure you install a fully-charged OMRON battery part number 68330-000. For instruc-
tions on checking the battery's state of charge, see: Battery Indicators and Controls on page 184.
Follow these steps to install the new battery:
1.
Remove the AMR front skin to access the battery compartment. For instructions on
removing AMR skins, see: Removing and Installing Skins on page 253
2.
Unlatch and open the battery door. The battery door opens all the way out and rests on
the floor. This allows you to use the battery door as a ramp. See: Figure 8-21.
Figure 8-21. Battery Door Opens Out
3.
Use the extended handle to push the battery into the platform. See: Figure 8-22.
To Next Page
Loading...
