Omron MD Series

A-4
Shipping the AMR
Make the following considerations when shipping the AMR to another location.
• Keep the original crate and shipping materials supplied with the AMR. Use these to repackage the
AMR before shipping. Refer to the Autonomous Mobile Robot (AMR) MD-series Platform Safety and
Unpacking Guide (Cat. No. I682) for more information.
• Before shipping a battery, ensure it is in good, working condition and has not been subjected to con-
ditions that may have caused damage.
• Keep the AMR and battery within the specified environmental ranges during transportation. Refer to
2-3 Environmental Specifications on page 2-13 for more information.
• Do not subject the AMR or battery to excessive shock or vibration during transportation.
• Place the Main Disconnect Switch in the OFF position. Refer to 4-15 Main Disconnect Switch on
page 4-32 for more information.
• Turn the battery OFF using the battery pushbutton. Refer to Battery Pushbutton on page 4-21 for
more information.
• If the battery is shipped with the AMR, replace padding that was removed during the unpacking pro-
cedure. Refer to Autonomous Mobile Robot (AMR) MD-series Platform Safety and Unpacking Guide
(Cat. No. I682) for more information.
• Check the battery charge level for compliance with shipping regulations.
• Plan adequate shipping times to prevent battery depletion during transit or storage.
Appendices
A-7
AMR (Autonomous Mobile Robot) MD-series Platform User's Manual (I681)
A-4 Shipping the AMR
A