FP2/FP2SHTable of Contents
xiv
IC memory cards for the FP2SH
The existing model number becomes the one to be discontinued because of the
termination of manufacturing IC memory cards by the parts manufacturer. When placing
a new order, specify the new product number.
Termination of Production
Type Memory capacity Model No. Battery type
SRAM
2MB AIC52000 Internal secondary battery (Rechargeable type)
New product
Type Memory capacity Model No. Battery type
SRAM
2MB AFP2209 Lithium Battery (Interchangeable type)
Notes
For AFP2209
• An interchangeable lithium battery is used. When you use for
the first time, install the battery included.
For AIC52000
• Memory backup of the SRAM type of IC memory card
(AIC52000) Is handled by an internal secondary battery. When
the battery is used for the first time, power must be supplied
for at least 24 hours to charge it fully. When the battery is fully
charged, data is backed up for more than three months with
out the power being turned on. Normally, the card should be
installed in the PLC and power supplied when using it. Failing
to charge the battery periodically can reduce the backup
period and the service life of the battery. The backup battery
cannot be replaced.
To Next Page
Loading...
Need help?
General
