FP2/FP2SH OperationFP2/FP2SH
6 − 31
6.8 FP2SH IC Memory Card Operation (for FP2−C2P/FP2−C3P)
6.8.2 Creating Files for Automatically Run Programs
In order to automatically execute programs stored on the card when the power supply
is turned on, the following procedure must be used to convert the programs to programs
that will run automatically.
Procedure:
1. On the FPWIN GR tool software menu, select the follow-
ing: “T
ool” ∋ “IC Card Service” ∋ “Auto−Run File
Conversion...”.
2. Select the program to be started up automatically.
3. Select the destination to which the program is to be
stored after it is converted.
4. An auto run file is created, and a confirmation message
displayed.
The auto run file created in this procedure can be read using the various IC card menus.
The following shows the screen displayed for “Copy File t
o IC Card (Flash Memory)”.
To Next Page
Loading...
Need help?
General
