FP2/FP2SH OperationFP2/FP2SH
6 − 29
6.8 FP2SH IC Memory Card Operation (for FP2−C2P/FP2−C3P)
6.8 FP2SH IC Memory Card Operation (for FP2 −C2P/
FP2−C3P)
6.8.1 Operating Using the IC Memory Card
IC memory cards can be used to back up programs and as operation memories, but they
can also be used for operation, with programs that have been written to the card.
Writing Programs to the Card
The “Copy File” menu in the tool software is used to write programs to a card. When this
is used to transfer programs automatically, a file created ahead of time must be con-
verted to the file to be used for automatic transfer.
The converted file can be confirmed in the software, under the file name “Autoex-
ec.spg”.
If the card is an SRAM type, the “ROM & RAM service...” menu and “IC Card Service”
menu can also be used.
To Next Page
Loading...
Need help?
General
