11-93
11.4.3 Table of MEWTOCOL-COM Communication Error
Error
code
Name Description
Link system error
!25
Link unit hardware
Link system error
!32
Transmission
A transfer error occurred in the received data.
A command was received that does not fit the format.
A command was received that is not supported.
A different command was received when processing multiple
!50 Link setting error
A route number that does not exist was specified. Verify the route
number by designating the transmission station.
Transmission to another device not possible because transmission
Transmission processing to another device is not possible.(Link
!53 Busy error
Command process cannot be received because of multiple frame
processing. Or, cannot be received because command being
processed is congested.
Content of specified parameter does not exist or cannot be used.
!61 Data error
There was a mistake in the contact, data area, data number
designation, size designation, range, or format designation.
!62
Registration over
Operation was does when number of registrations was exceeded
or when there was no registration.
!63 PC mode error
PC command that cannot be processed was executed during RUN
mode.