FP2/FP2SHFP2/FP2SH Operation
6 − 16
6.5 FP2SH Operation
6.5.3 Comment Function
The FP2SH is equipped with a function that allows program comments (I/O comments,
block comments, remarks) to be stored.
Comment
Type FP2−C2L, FP2−C2 FP2−C2P, FP2−C3P
Storage memory Internal SRAM Internal FROM
Storage capacity 128 KB 512 KB
Backup Backup required Backup not required
The “Download to PLC” function in the FPWIN GR can be used to write programs and
comments. Check to make sure that a check mark has been placed by “Program and
Comment” under “Program Access Mode” on the “F
PWIN_GR Configuration...” menu
of the FPWIN GR.
Comment
The “Download to PLC” function in the FPWIN GR can be used to automatically store
programs in the FPWIN GR to the internal RAM, and to automatically store comments
to the comment memory.
Comment
Selecting the “Upload from PLC” function lets you load programs in the internal RAM
and data in the comment memory into the FPWIN GR.
To Next Page
Loading...
Need help?
General
