Table of Figures
FP2/FP2SH
xv
Compatibility of FP2/FP2SH and FP10SH,
and Precautions
Hardware Compatibility
The unit, backplane, and other components are not compatible.
The components for the FP2 are used with the FP2SH.
When using the FP2 backplane (AFP25**), the maximum number of expansion
points is lower.
With the FP10SH and FP2 backplane H type (AFP25**H), up to three expansion boards
can be used, and a maximum of 2048 points controlled, but if using the FP2 backplane
with the FP2/FP2SH, only one expansion board can be used, and a maximum of 1600
points controlled.
Different types of IC memory cards are used.
The only type of IC card that can be used with the “Part number FP2−C2P and
FP2−C3P” FP2SH CPU is the IC memory card (small PC card). The IC memory card
for the FP10SH cannot be used.
Software Compatibility
With the FP2SH, in comparison with the FP10SH, there are no functions that cannot
be used. For other detailed specifications, check the specifications comparison table
on the previous page.
To Next Page
Loading...
Need help?
General
