FP2/FP2SH OperationFP2/FP2SH
6 − 23
6.7 FP2SH ROM Operation
6.7.5 Sending Data from the RAM to the FROM
The “RAM → ROM Transfer” function in the FPWIN GR is used to send programs and
data in the CPU to the ROM. The data range can be specified as any of the following
fields: WL, WR, DT, FL, SV, EV, and LD.
Preparation
Set the CPU in the PROG. mode.
Procedure:
1. Select “On
line Edit Mode” on the “Online” menu.
The system goes online, and online monitoring begins automatically.
The
icon on the tool bar can also be used to do this.
2. Select “ROM & RAM service...” on the “Tool” menu.
next page
To Next Page
Loading...
