FP2/FP2SH OperationFP2/FP2SH
6 − 33
6.8 FP2SH IC Memory Card Operation (for FP2−C2P/FP2−C3P)
6.8.4 Transferring Data From the RAM to the IC Memory Card
The “RAM → ROM Transfer” function in the FPWIN GR tool software is used to send
programs and data in the CPU to an SRAM type IC memory card. The data range can
be specified as any of the following fields: WL, WR, DT, FL, SV, EV, and LD. (DIP switch
settings: SW2: off, SW4: on)
Internal SRAM
Program
Data
Comment
Internal FROM
Data
Program
Autoexec.spg
IC memory card
RAM→ROM
transmission
FP2SH (FP2-C2P, FP2-C3P)
Note
This method can only be used with an SRAM type IC memory
card.