EasyManuals Logo

Panasonic fp2/fp2sh User Manual

Panasonic fp2/fp2sh
374 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #2 background imageLoading...
Page #2 background image
Safety Precautions
Observe the following notices to ensure personal safety or to prevent accidents.
To ensure that you use this product correctly, read this User’s Manual thoroughly before use.
Make sure that you fully understand the product and information on safety.
This manual uses two safety flags to indicate different levels of danger.
If critical situations that could lead to user’s death or serious injury is assumed by
mishandling of the product.
WARNING
-Always take precautions to ensure the overall safety of your system, so that the whole system
remains safe in the event of failure of this product or other external factor.
-Do not use this product in areas with inflammable gas. It could lead to an explosion.
-Exposing this product to excessive heat or open flames could cause damage to the lithium
battery or other electronic parts.
-Battery may explode if mistreated. Do not recharge, disassemble or dispose of fire.
If critical situations that could lead to users injury or only property damage is
assumed by mishandling of the product.
CAUTION
-To prevent excessive exothermic heat or smoke generation, use this product at the values less
than the maximum of the characteristics and performance that are assured in these
specifications.
-Do not dismantle or remodel the product. It could cause excessive exothermic heat or smoke
generation.
-Do not touch the terminal while turning on electricity. It could lead to an electric shock.
-Use the external devices to function the emergency stop and interlock circuit.
-Connect the wires or connectors securely.
The loose connection could cause excessive exothermic heat or smoke generation.
-Do not allow foreign matters such as liquid, flammable materials, metals to go into the inside of
the product. It could cause excessive exothermic heat or smoke generation.
-Do not undertake construction (such as connection and disconnection) while the power supply
is on. It could lead to an electric shock.
Copyright / Trademarks
-This manual and its contents are copyrighted.
-You may not copy this manual, in whole or part, without written consent of Panasonic
Electric Works SUNX Co., Ltd.
-Windows and Windows NT are registered trademarks of Microsoft Corporation in the United
States and/or other countries.
-All other company names and product names are trademarks or registered trademarks of their
respective owners.
BATN

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Panasonic fp2/fp2sh and is the answer not in the manual?

Panasonic fp2/fp2sh Specifications

General IconGeneral
BrandPanasonic
Modelfp2/fp2sh
CategoryController
LanguageEnglish

Related product manuals