FP2/FP2SHFP2/FP2SH Operation
6 − 26
6.7 FP2SH ROM Operation
Notes
• Refer to the commercially available ROM writer manual re-
garding the ROM IC type setting and writing method. If a
passwords is on the CPU, it is possible to create a password
for master memory.
• When writing the contents of the FP2SH internal RAM to mas-
ter memory, be sure to verify that the DIP switches SW2 is off
position before turning the power on.
Notes
1) The above explanation describes the case where the memory
unit is used in combination with F−ROM and EP−ROM. As the
nonvolatile memory has been implemented in the memory unit
(Model number AFP2208), a commercial ROM writer cannot be
used for writing.
2) The parts for the optional memory to be used differ depending
on FP2 or FP2SH.
To Next Page
Loading...
