IC Memory CardFP2/FP2SH
7 − 7
7.2 Formatting and Erasing
Using Different Sections of the Card as a Program Memory Field and
Expanded Memory Field
Any desired settings may be entered for the field to be formatted. Of the entire field, any
part of the field not formatted (program memory field) is used to expand the memory
field.
FROM type
Procedure:
1. On the “T
ool” menu, choose “IC Card Service” and then
“E
rase IC Card...” to erase the entire field.
2. On the “T
ool” menu, select “IC Card Service” and then
“Copy File t
o IC Card...” to specify the format size. Then
copy the program from a floppy disk or the hard disk, to
the IC memory card.
3. Boot the “Data Editor”.
4. In the “Edit IC Memory Card Data” mode, create a file, or
open an existing file.
5. On the “F
ile” menu, select “Download to PLC”, and
transfer the data.
SRAM type
Procedure:
On the “T
ool” menu, choose “IC Card Service” and then
“F
ormat IC Card...”. Specify the necessary segment as a
program memory, and format it.
To Next Page
Loading...
Need help?
General
