Panasonic fp2/fp2sh - Page 281

11-13
FP2/FP2SH/FP10SH
Item
Add-
ress
Name
Default
value
Descriptions
Remote
I/O
control
25
Operation settings when
connection time error
occurs in the remote
slave station
Available PLC: FP2SH
Stop Stop/continuation
35
Operation mode setting
when the MEWNET-F
system is used
Enabled
(wait for
connec-
tion)
Enabled:
Disabled:
CPU starts operation after
all the salve stations are
recognized.
CPU starts operation
without waiting for slave
station connections.
Only effective when registering
remote I/O allocation.
36
I/O data updating mode
settings for MEWNET-F
system
Scan syn-
chronous
Scan asynchronous mode/
Scan synchronous mode
PC link
0
setting
40
PC link 0
settings for
MEWNET-
W/-P link
system
(*Note)
Size of link
relays used
for commu-
nication
0 0 to 64 words
41
Size of link
data
registers
used for
commu-
nication
0 0 to 128 words
42
Send area
starting
address of
link relay
0 0 to 63
43
Size of link
relays used
for send
area
0 0 to 64 words
44
Send area
starting
address of
link data
register
0 0 to 127
45
Size of link
data
registers
used for
send area
0 0 to 127 words
46
PC link 0 and 1 allocation
setting for MEWNET-W/-P
link system
(*Note)
Normal
allocation
Normal allocation:
(PC link 0 for the link unit with a
smaller slot number and PC link 1 for
one with a larger slot number)
Reverse allocation:
(PC link 1 for the link unit with a
smaller slot number and PC link 0 for
one with a larger slot number)
Note) Available PLC MEWNET-W: FP10SH, FP2, FP2SH
MEWNET-P: FP10SH