Panasonic fp2/fp2sh - Page 36

FP2/FP2SHOverview
1 − 18
1.3 Expansion Function
Table of specifications
Item
Description
1:1 communication 1:N communication
Communication method Half duplex
Synchronization method Start−stop synchronous system
Transmission speed
(Baud rate)
2,400bps/4,800bps/9,600bps/19,200
bps
9,600bps/19,200bps
Transmission code ASCII
Transmission format Character bit: 7 bits, parity check: odd and stop bit: 1 bit
Character bit: 8 bits, parity check: none and stop bit: 1 bit
Necessary devices in configuration
1:1 communication 1:N communication
FP2/FP2SH
Commercially available computer
MODEM
Commercially available RS232C cable
* When using the TOOL port, an FP PC cable M5
type (AFC8513) and a self-made cable are nec-
essary.
FP2/FP2SH
Commercially available computer
MODEM
Commercially available RS232C cable
C-NET adapter (AFP8536/AFP8532) × 1 piece
C-NET adapter S2 type (AFP15402) × number of PLC
Two-core cable (VCTF 0.75mm
2
)