Panasonic fp2/fp2sh - Page 7

Table of Figures
FP2/FP2SH
v
6.7.1 ROM Operation Function 6 − 19.................................
6.7.2 ROM Operation Method 6 − 20..................................
6.7.3 Precautions When Operating the ROM 6 − 21.....................
6.7.4 Checking the ROM Contents While Using RAM Operation 6 − 22....
6.7.5 Sending Data from the RAM to the FROM 6 − 23..................
6.7.6 Writing Data to the ROM (AFP5209) (only the FP2−C2
can be installed) 6 − 25.........................................
6.7.7 Writing Data to the ROM: Using the FPWIN GR 6 − 27.............
6.8 FP2SH IC Memory Card Operation (for FP2−C2P/FP2−C3P) 6 − 29.........
6.8.1 Operating Using the IC Memory Card 6 − 29......................
6.8.2 Creating Files for Automatically Run Programs 6 − 31..............
6.8.3 How the IC Memory Card is Operated 6 − 32......................
6.8.4 Transferring Data From the RAM to the IC Memory Card 6 − 33......
Chapter 7 IC Memory Card
7.1 Using the IC Memory Card 7 − 3.........................................
7.1.1 Types of IC Memory Cards 7 − 3.................................
7.1.2 Using the IC Memory Card 7 − 4..................................
7.2 Formatting and Erasing 7 − 6............................................
7.2.1 Program Memory Field and Expanded Memory Field 7 − 6...........
7.2.2 Procedure for Formatting the IC Memory Card 7 − 8.................
7.2.3 Procedure for Erasing the IC Memory Card 7 − 11..................
7.2.4 Data Storage Capacity of IC Memory Card 7 − 12..................
7.3 For Use as Program Memory 7 − 13.....................................
7.3.1 Writing the Program 7 − 13.....................................
7.3.2 Reading the Program 7 − 18....................................
7.4 For Use as Expansion Memory 7 − 22....................................
7.5 Menus Related to Tool Software 7 − 25...................................
Chapter 8 Self-Diagnostic Function and Troubleshooting
8.1 Self-Diagnostic Function 8 − 3...........................................
8.1.1 LED Display for Status Condition 8 − 3............................
8.1.2 Operation When an Error Occurs 8 − 4............................
8.2 Troubleshooting 8 − 5...................................................
8.2.1 If the ERROR LED Lights 8 − 5...................................
8.2.2 If the ALARM LED Lights 8 − 7...................................
8.2.3 If the LED (POWER) of the Power Supply Unit Does Not Light 8 − 7...