Panasonic KX-NS1000 - Page 1248

– CO Line Access Number + Telephone Number
– CLI Destination
• 18.2 PBX Configuration—[10-2] CO & Incoming Call—DIL Table & Port Settings—CLI for DIL— CLI
Ring for DIL—Day, Lunch, Break, Night
• 18.3 PBX Configuration—[10-3] CO & Incoming Call—DDI / DID Table— CLI Ring for DDI/DID—Day,
Lunch, Break, Night
Feature Manual References
4.1.14 CLI (Calling Line Identification) Distribution
CLIP (Calling Line Identification Presentation)
• 9.27 PBX Configuration
—[1-1] Configuration—Slot—Port Property - PRI Port
– CO Setting—
Subscriber Number
– Supplementary Service
—
COLP, CLIR, COLR, CNIP, CONP, CNIR, CONR, CF (Rerouting), CT,
CCBS, E911
• 10.6.1 PBX Configuration—[2-6-1] System—Numbering Plan
—Main—Features
–
COLR Set / Cancel
– CLIR Set / Cancel
– Switch CLIP of CO Line / Extension
• 10.9 PBX Configuration
—[2-9] System—System Options—Option 4
–
Send CLIP of CO Caller—when call is transferred to CO (CLIP of Held Party)
– Send CLIP of CO Caller—when call is forwarded to CO
– Send CLIP of Extension Caller—when call is forwarded to CO
• 11.5.1
PBX Configuration—[3-5-1] Group—Incoming Call Distribution Group—Group Settings—Main—
CLIP on ICD Group Button
• 12.1.1 PBX Configuration—[4-1-1] Extension
—Wired Extension—Extension Settings
– Main—
Extension Number
– CLIP— CLIP ID
– CLIP— CLIP on Extension/CO
– CLIP— CLIR
– CLIP— COLR
• 12.1.4 PBX Configuration—[4-1-4] Extension
—Wired Extension—Flexible Button—
Type
• 12.2.1 PBX Configuration—[4-2-1] Extension
—Portable Station—Extension Settings
– CLIP—
CLIP ID
– CLIP— CLIP on Extension/CO
– CLIP— CLIR
– CLIP— COLR
• 12.2.3 PBX Configuration—[4-2-3] Extension—Portable Station—Flexible Button— Type
Feature Manual References
4.1.15 CLIP (Calling Line Identification Presentation)
CO Line Access
• 9.23 PBX Configuration—[1-1] Configuration—Slot—SLC2 - Port Property— Connection
• 9.25 PBX Configuration
—[1-1] Configuration—Slot—Port Property - LCO Port—
Connection
• 9.27 PBX Configuration
—[1-1] Configuration—Slot—Port Property - PRI Port—
Connection
• 10.6.1 PBX Configuration—[2-6-1] System—Numbering Plan
—Main—Features
–
Idle Line Access (Local Access)
– Trunk Group Access
– Single CO Line Access
• 10.7.2 PBX Configuration—[2-7-2] System—Class of Service
—External Call Block
1248 PC Programming Manual Document Version 2016-03
Feature Programming References