5
Replacement Level Supported 53
Software Revision Check 54
Obtaining Replacement Parts 54
Troubleshooting Guide 54
Checks for Obvious Problems 54
Checks Before Opening the Instrument 55
Checks with the Instrument switched Off 55
Checks with the Instrument Switched On, AC connected 55
Initial Instrument Boot Phase 56
Troubleshooting Tables 58
How to use the Troubleshooting tables 58
Boot Phase Failures 59
Integrated Display is blank 61
Integrated Touch Display not functioning 62
External Display is blank 63
External Touch Display not functioning 64
General Monitor INOP Messages 65
Remote Alarm Device 66
Remote Extension Device 66
Speed Point 67
Keyboard/Mouse not functioning 67
Network related problems 69
Wireless Network 70
Multi-Measurement Server 71
MSL-related problems 72
Alarm Issues 74
Alarm Lamps 74
Alarm Tones 74
Alarm Behavior 74
Individual Parameter INOPS 75
Flexible Module Server 76
Integrated Module Slots 76
Printer 77
Recorder 78
MIB / RS232 80
Flexible Nurse Call Relay 81
Troubleshooting the ECG OUT 81
Data Flow Marker In and ECG Wave 82
Status Log 83
Troubleshooting with the Support Tool 83
Troubleshooting the Individual Measurements or Applications 85
5 Repair and Disassembly 87
Tools Required 87
Minimal Monitor Disassembly 87
Disconnecting the SpeedPoint 87
To Next Page
Loading...