6
Removing the I/O Boards 89
Removing the ECG Out board if no SRL2 board is plugged 90
Removing the Integrated Module Slot, the Measurement Server Mount or blank covers 91
Separating the front and back half of the monitor 92
Removing Power Switch board 94
Removing the Backlights 95
Further Disassembly 95
Exchanging the Touchscreen 95
Exchanging the LCD Assembly 96
Removing Power Supply 98
Removing the Speaker 99
Removing the ECG Out Board with an SRL2 Board plugged 100
Removing the Video Board 101
Removing the Main Board 101
Flexible Module Server (FMS) Disassembly 103
Removing the Handle and the Measurement Server Mount 103
Plug-in Modules 107
Plug-In Module Disassembly 107
tcpO2/tcpCO2 Calibration Chamber Kit 108
Recorder Module Paper 109
Disassembly Procedures for the Measurement Server Extension 109
Removing the Front Cover 110
Removing the Extension Bottom Cover 110
Removing the CO2 Scrubber 111
Removing the Pump 112
Refit Procedures for the Measurement Server Extension 113
Refitting the CO2 Scrubber 113
Refitting the Pump 113
Refitting the Extension Bottom Cover 114
Refitting the Front Cover 114
General Reassembly/Refitting Comments 114
Following Reassembly 114
6 Parts 115
MP60/MP70 Parts 116
Exchange Parts 116
Replacement Parts 117
Flexible Module Server Parts 118
Exchange and Replacement Parts 118
Multi-Measurement Server Parts 119
Measurement Server Extension Parts (M3015A and M3016A) 120
Exchange Parts List 122
Plug-in Modules Part Numbers 124
Part Number Table 124
Exchange Modules, Table 1 124
Exchange Modules, Table 2 125
To Next Page
Loading...