Web-based management WBM
108580_en_02 PHOENIX CONTACT 201 / 272
Logging in as user If WBM user authentication is activated, log in using your user details.
• Enter your user name in the “Username” input field.
• Enter your password in the “Password” input field.
• To open WBM, click on the “Login” button.
The WBM start page opens (see Section 9.6).
9.6 WBM start page – Areas and functions
Figure 9-5 WBM start page
WBM is organized into the following areas:
– Information: general device information
– Diagnostics: PROFINET
– Configuration: update of the non-safety-related device firmware
– Security: user authentication, certificate authentication and firewall
– Administration:
Please note:
After changing the access data for the administrator, it is no longer possible to login with
the user name “admin” and the administrator password printed on the controller.
To Next Page
Loading...
Need help?
General
