Previous Page Table of Contents Section Contents
Back
Index Next Page
LIFEPAK 20/20e Defibrillator/Monitor Troubleshooting
Service Indicator
The service indicator LED does not indicate the presence of errors in the Service
Log. The service indicator LED illuminates when a service code is written to the
Service Log. Refer to Processing Service Codes to resolve the problem.
For example, if the service indicator illuminates when you turn on the device, a
service code has been written to the Service Log. If you cycle the power, and the
service indicator does not illuminate again, it does not mean that there are no
codes in the Service Log. You must review the Service Log and resolve the
service code that was written there in the first instance.
6-48
To Next Page
Loading...
