Previous Page Table of Contents Section Contents
Back
Index Next Page
LIFEPAK 20/20e Defibrillator/Monitor Modes of Operation
Setup Mode
Introduction
The operating defaults for the device are configured in the SETUP menu. Options
include manual mode and AED mode operating characteristics, alarm setup,
time-of-day clock, and others. There is also a factory-reset option that resets the
device to the factory default settings, except the maintenance interval, which
remains unchanged. After the setup is complete, turn off the device to save the
configuration. The next time the device is turned on, the operating defaults last
selected will be active.
For a complete description of setup options, refer to the Defining Setup Options
section in the operating instructions.
4-5
To Next Page
Loading...
