Physio Control LIFEPAK 20 - Assemblies

Previous Page Table of Contents Section Contents
Back
Index Next Page
LIFEPAK 20/20e Defibrillator/Monitor Device Description
Introduction (continued)
Assemblies
The device consists of a three-piece case assembly and optional extension
module that enclose the following modules/PCBs:
and the following OEM and mechanical components:
and the following attachments:
1. System Control PCB
2. Patient Parameter PCB
3. Power module
4. Therapy PCB
5. User Interface PCB
6. OEM modules
1. Display
2. Speaker
3. User controls and indicators
4. Printer
5. SpO2 acquisition
6. Patient connector panel
7. System connector panel module
8. Internal ac to dc power supply
9. Internal battery
10. Internal cables
1. ECG 3- or 5-wire cables
2. QUIK-COMBO cable
3. SpO2 cable
4. Internal paddles
5. Standard paddles
3-5