Previous Page Table of Contents Section Contents
Back
Index Next Page
LIFEPAK 20/20e Defibrillator/Monitor Device Description
Functional Description
Introduction
The LIFEPAK 20/20e defibrillator/monitor is a medical device capable of
combining a variety of therapeutic and monitoring features. In addition to
automatic defibrillation, semiautomatic defibrillation, manual defibrillation, and
noninvasive pacing, the device offers SpO2 and ECG monitoring. This device
should be used indoors only (for example, a hospital or therapy center) and is
powered by ac (line) power. There is an additional internal battery for use as a
backup to ac power.
The following functional description is intended to provide service personnel with
a basic understanding of the device design. Its purpose is to assist qualified
service technicians in troubleshooting to the subassembly level. Troubleshooting
below the subassembly level outside the factory is not recommended, nor is it
within the scope of this service manual to provide the detail necessary to support
such repairs.
Refer to the diagrams on the next two pages as you review the descriptions that
follow.
3-19
To Next Page
Loading...
