Previous Page Table of Contents Section Contents
Back
Index Next Page
LIFEPAK 20/20e Defibrillator/Monitor Modes of Operation
Setup Mode (continued)
Setup Menu Options
(continued)
Saving the Setup
Configuration
If the device owner uses a setup configuration that cannot be disturbed, there
are choices available to preserve setup during repair procedures.
■ If the device owner has a LIFENET System account, then use the LIFENET
Device Agent application to manage setup configurations.
■ The LIFEPAK 20 configuration transfer cable can be used to transfer the
setup configuration to another device. After service is complete, transfer
the configuration back to the original device.
Option Description
PRINT DEFAULTS
Print a report of current configuration settings.
SEND CONFIG
Send device configuration to another device.
SET PASSCODE
Set passcodes for setup mode and archives mode.
SERVICE
Display the SERVICE menu.
4-8
To Next Page
Loading...
