EasyManua.ls Logo

Physio Control LIFEPAK 20 - Manual Mode Operation; AED Mode Operation

Physio Control LIFEPAK 20
370 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Previous Page Table of Contents Section Contents
Back
Index Next Page
LIFEPAK 20/20e Defibrillator/Monitor Device Description
Introduction (continued)
Manual Mode
Operation
In manual mode (AED MODE indicator off), the device enables the operator to
manually select an energy level, initiate a charge sequence, and apply energy in
either direct or synchronized modes. When the operator selects the
VF/VT ALARM
from the
ALARMS menu, the continuous patient surveillance system (CPSS)
monitors the patient’s ECG for a shockable rhythm. A suspect rhythm alerts the
operator with a priority tone and screen message. The operator can then follow
locally established guidelines for the administration of defibrillation therapy.
AED Mode Operation
In AED mode (AED MODE indicator on), the device uses the CPSS to monitor the
patient’s ECG for a shockable rhythm. A suspect rhythm alerts the operator with
a priority tone and screen message. The operator may continue by pressing the
ANALYZE button, which allows the Shock Advisory System to analyze the ECG
rhythm and make recommendations. The operator can then follow locally
established guidelines for the administration of defibrillation therapy. For more
information about CPSS and Shock Advisory System, refer to Appendix E in the
operating instructions.
3-3

Table of Contents

Other manuals for Physio Control LIFEPAK 20

Related product manuals