Previous Page Table of Contents Section Contents
Back
Index Next Page
LIFEPAK 20/20e Defibrillator/Monitor Replacement Procedures
Front Case (continued)
A15 Elastomer Keypad
Removal
To remove the A15 Elastomer Keypad:
1. Peel the old keypad away from the front case.
2. Thoroughly clean the front case.
A15 Elastomer Keypad
Installation
To install the A15 Elastomer Keypad:
1. Select one of the following device configurations to find the MIN (part
number) for the correct keypad for your device:
– Keypad View
– Keypad Parts List
2. After thoroughly cleaning the front case, position the left and right bottom
edges of the A15 Elastomer Keypad flush against the bottom corners of the
front case.
3. Press the A15 Elastomer Keypad onto the front case ensuring that it is flush
against the case with no air pockets or gaps.
Parts List Interconnect Front Case View Rear View Main Assemblies
9-42
To Next Page
Loading...
