Previous Page Table of Contents Section Contents
Back
Index Next Page
LIFEPAK 20/20e Defibrillator/Monitor Device Description
Ordering Devices, Supplies, and Accessories (continued)
You can install the docking station on any flat surface using the installation template provided with the device. Place
the template where you want to install the docking station and use it as a guide to drill the holes for the screws that
secure the device.
Note: Ensure that the device has an adequate turning radius before installing the docking station.
Item Description MIN CAT.
SpO2 -option ■ LNOP
®
reusable adult finger sensor 3201655-003 11171-000007
■ LNOP SpO2 cable, 2.4 m (8 ft) 3201655-001 11171-000008
■ LNCS reusable adult finger sensor 3201655-011 11171-000017
■ LNCS SpO2 cable, 3.6 m (10 ft) 3201655-010 11171-000016
ECG ■ 3-lead ECG cable (AHA) 3006218-02 11110-000029
■ 3-lead ECG cable (IEC) 3006218-03 11100-000030
■ ECG electrodes (package of 3) 800139-003 11100-000001
5-wire ECG -option ■ 5-wire ECG cable (AHA) 3200496-00 11110-000066
■ 5-wire ECG cable (IEC) 3200496-01 11110-000067
Standard Paddles ■ Standard Paddles (Eng) 3200936-013 11130-000037
Docking Station ■ Docking station and installation template 3201551-002 21330-000996
3-16
To Next Page
Loading...
