Physio Control LIFEPAK 20 - Page 86

Previous Page Table of Contents Section Contents
Back
Index Next Page
LIFEPAK 20/20e Defibrillator/Monitor Modes of Operation
Service Mode
Introduction
The service mode functions enable qualified service technicians to:
* The performance inspection procedure must be performed from start to finish
in the order presented.
Function Description
*Perform device
calibration routines
■ Defibrillation
Calibration
*Perform device tests ■ Keypad Test
■ Pixels Test
■ Printer Test
■ Audio Test
View the device status
registers
■ Device Log Status
■ Service Log Status
■ Device Data
■ Counters Status
■ Clear Memory
Set the service mode passcode
Set the maintenance prompt interval
Reset the maintenance prompt interval
(Continued on next page)
4-11