Polyend Tracker+ - Page 111

111
Polyend Tracker+ Manual
NOTES
Instruments
6
0 Frequency Band 100
High Pass Filter
Level
2
3
1
0 Frequency Band 100
Low Pass Filter
Level
2
3
1
0 Frequency Band 100
Band Pass Filter
Level
2
3
1
Filter Type
Selects the type of lter to apply.
Options; Disabled, Low-pass, High-pass, Band-pass
Filter Types & Functions
A lter attenuates and cuts areas of the frequency range in an audio signal.
A low pass lter allows the frequencies through which
are below the cutoff frequency and attenuates the
audio signal frequencies above the cutoff. Resonance
boosts the audio at the selected frequency.
A high pass lter allows the frequencies through which
are above the cutoff frequency and attenuates the
audio signal frequencies below the cutoff. Resonance
boosts the audio at the selected frequency.
A band pass lter allows frequencies through within a
band of the cutoff frequency and attenuates the rest of
the audio signal frequencies. Resonance boosts the
audio at the selected frequency. Band width (Q) is not
adjustable in the Tracker+ band-pass lter.
Cutoff
Filter cutoff frequency. Point of attenuation.
Range is 0% to 100%
Resonance
Boosted frequency point to create resonance.
Range is 0% to 100%
Cutoff
100
Finetune Resonance
0
Filter Type
Low-pass
P1.008
Disabled
Low-pass
High-pass
Band-pass
1.Analog 3 18p
2
3
1
Filter