112
Polyend Tracker+ Manual
NOTES
Instruments
6
Access to control the general parameters is simple and quick. The process
described applies when accessing all instrument parameters and effects.
▌ ADJUSTING INSTRUMENT PARAMETERS
1. Ensure the desired instrument is selected. This will be shown top right
of the screen.
2. Press [Instrument Parameters] to select the parameters pages.
3. Pressing [Instrument Parameters] again will toggle between the general
parameter page and the automation parameters.
4. Within the instrument page 1/2 (displayed top left), the instrument
effects are accessible. Press [More], 8
th
Screen button to open the
effects page, and press [Back] to return to the main page.
5. Press the screen button below the desired option to select. Pressing
[Left] or [Right] will navigate the options. The selected parameter will
show a red bounding box.
6. Within a selected option, Turn (Jog) to manually adjust the parameter
value e.g. Volume.
7. Alternatively, Press [Up] or [Down] to incrementally adjust the parameter
value. Holding [Up] or [Down] will continuously adjust the value.
8. With a parameter selected, Press [Delete/Backspace] to reset it’s value
to the default setting. For example Panning will reset to 0.
9. Parameters are presented in columns. The value is shown in the
graphic of the upper main page and also the exact value is shown
below the parameter name in the screen button labels.
10. To exit the instrument parameters, select another page e.g. [Pattern].
To Next Page
Loading...
